RQ
T
8
7
3
6
40
Spea
ker
in
stal
latio
n
op
tions
Speaker installation options
∫
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached should be capable of supporting over 10 k
g
per
screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may
result in damage to the wall and speakers.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw with the hole.
∫
Fitting speaker stands
(not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥
The stands must be able to support over 10 k
g
.
≥
The stands must be stable even if the speakers are in a high position.
‰
7.5 to 9.5 mm
5.0 to 7.0 mm
Wall or pillar
‰
4.0 mm
Center speaker
Front and surround speakers
Speaker stand
(not included)
Plate thickness plus 7 mm to 10 mm
e.g.
Center speaker
5 mm,
pitch 0.8 mm
Metal screw hole
For attaching to
speaker stand
HT545W-B.book Page 40 Friday, April 7, 2006 4:42 PM
