R
Q
T
873
6
37
Usi
ng s
ound
eff
e
c
ts
You can adjust the amount of bass. The unit
automatically selects the most suitable setting according
to the type of playback source.
Press [SUBWOOFER LEVEL].
(Settings can be confirmed on the display or the
television screen.)
≥
[DVD-V]
[DVD-VR]
SUB W 4 (factory preset)
>
SUB W 1
>
SUB W 2
>
SUB W 3
^-------------------------------------------------------------------------------}
≥
When another source is selected
SUB W 2 (factory preset)
>
SUB W 3
>
SUB W 4
>
SUB W 1
^-------------------------------------------------------------------------------}
≥
To check the current setting, press
[SUBWOOFER LEVEL].
≥
The setting you make is retained, and recalled every
time you play the same type of source, except when
Sound Field Control (MOVIE, SPORT or MUSIC) is
turned on.
§
When Sound Field Control (MOVIE, SPORT or MUSIC)
is on, the factory presets are as follows:
– MOVIE: SUB W 4
– SPORT: SUB W 2
– MUSIC: SUB W 1
This is one of the ways to get appropriate surround effects.
Preparation
Press [DVD].
∫
To adjust speaker level during play
[Effective when playing multi-channel audio or when
Dolby Pro Logic
II
or Sound Field Control (MOVIE,
SPORT or MUSIC) is on.]
1
Press [CH SELECT] to select the speaker.
L
#
C
#
R
#
RS
#
LS
#
SW
^----------------------------------------------}
SW: Subwoofer
≥
You can adjust SW only if the disc includes a
subwoofer channel.
≥
“SW” does not appear on the display and is not
adjustable when “
Î
PL
II
” is lit.
≥
“S” appears on the display when “MOVIE”,
“SPORT” or “MUSIC” is selected with Sound
Field Control (
➜
page 36).
In this case, you can adjust both surround
speaker levels at the same time using [
3
,
4
].
S:
`
6 dB to
i
6 dB
2
Press
[
3
]
(increase) or
[
4
]
(decrease) to
adjust the speaker level for each speaker.
C, RS, LS, SW:
`
6 dB to
i
6 dB
(L, R: Only the balance is adjustable.)
≥
To adjust the balance of the front speakers,
while “L” or “R” is selected, press [
2
,
1
].
Adjusting the amount of bass:
Subwoofer level
Adjusting the volume of each
speaker: Speaker level adjustments
1
While stopped and no on-screen display is shown
Press and hold [—TEST] to output a test signal.
≥
To stop the test signal, press and hold [—TEST]
again.
L: Front left
C: Center
R: Front right
RS: Right surround LS: Left surround
≥
There is no output from SW (subwoofer) channel.
2
Press [VOLUME,
r
] or [
s
] to set the volume level
normally used for listening.
3
Press [
3
] (increase) or [
4
] (decrease) to adjust
the speaker level for each speaker.
≥
Adjust the speaker levels to the same level as the
front speakers.
C, RS, LS:
`
6 dB to
i
6 dB
HT545W-B.book Page 37 Friday, April 7, 2006 4:42 PM
