6
RQT8043
RQT8733
Other speaker setup options
■
Attaching to a wall
You can attach the front, surround and center speakers to the wall.
• The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k
g
per screw.
Consult a qualifi ed building contractor when attaching the speakers to a wall. Improper attachment may result
in damage to the wall and speakers.
1
Drive a screw (not included) into a wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
Ø4.0 mm
Ø7.5 to 9.5 mm
5.0 to 7.0 mm
Wall or pillar
Front and surround speakers
Center speaker
Use outdoor antennas if radio reception is poor.
Note
• Disconnect the outdoor antenna when the unit is not in use.
• Do not use the outdoor antenna during a lightning storm.
FM outdoor antenna
(Using a television antenna)
Antenna plug adaptor (included)
Rear panel of
this main unit
FM outdoor antenna
(not included)
75
Ω
coaxial cable
(not included)
AM outdoor antenna
(Using a vinyl wire)
Rear panel
of this
main unit
AM outdoor antenna
(not included)
5 to 12 m
AM loop antenna
(included)
• Disconnect the FM indoor antenna.
• The outdoor antenna should be installed by a
competent technician.
• Run a piece of vinyl wire horizontally across a window
or any other convenient location.
• Leave the AM loop antenna connected.
Optional antenna connections
RQT8733-B.indd 6
RQT8733-B.indd 6
4/11/06 7:23:53 PM
4/11/06 7:23:53 PM
