12
RQT9754
With this function set to “ON”, you can stream
music from the iOS device or
Mac / PC (iTunes 10.2.2 or later) to this unit without
the need of a wireless network router.
≥
Previous network settings will be deleted when
this function is set to “ON”.
≥
The following explanations are based on an
iPhone.
1
Press [SETUP] repeatedly to select
“D.CONNECT”.
2
Press [
3
,
4
] to select “ON” and then press
[OK].
3
Press [
3
,
4
] to select “OK? YES” and then
press [OK].
4
Connect your iPhone to this unit’s wireless
network named “HC58 _ _ _ _ _ _”*
2
.
5
Enter the password that is indicated on this
unit’s display.
6
Once the iPhone is connected to this unit’s
wireless network, the setup is competed.
7
Continue to step 2 of “Using AirPlay with this
unit’s speakers”
(
l
11
).
≥
This setting is reset to “OFF” when other network
settings are performed. (
l
8)
≥
When “D.CONNECT” is set to “ON”, this unit will not be
connected to the Internet. It is not possible to update the
software or check the Wi-Fi signal strength.
≥
When AirPlay is not being used, disconnect the AirPlay
compatible device from this network.
≥
When using a computer on this network, make sure that
all the shared files are encrypted.
≥
This feature is only compatible with the “Open System”
authentication method. It is not compatible with “Shared
Key” authentication method.
The first time “D.CONNECT” is set to “ON”, a
password for this unit’s wireless network is
randomly created and memorized in this unit.
≥
This password is memorized until it is changed.
1
While “D.CONNECT” is set to “ON”:
Press [SETUP] repeatedly to select
“D.CONNECT”.
2
Press [
3
,
4
] to select “ON” and then press
[OK].
3
The current password is displayed.
≥
The 5 digits after "PW" is the password for
this network.
4
Press any button to exit.
1
While “D.CONNECT” is set to “OFF”:
Press [SETUP] repeatedly to select
“D.CONNECT”.
2
Press [
3
,
4
] to select “CHANGE PW” and
then press [OK].
3
Press [
3
,
4
] to select “OK? YES” and then
press [OK].
4
The new password is displayed.
≥
The 5 digits after "PW" is the new password
for this network.
5
Press any button to exit.
∫
Note about changing the password
After changing this unit’s wireless network
password, if you are not prompted to change the
password on the other devices, the following
changes are required.
iOS device (iPod touch/iPhone/iPad)*
3
:
≥
Before choosing this unit’s network,
1
Select [ ] located beside this unit’s wireless
network name.
2
Select “Forget this Network” and then select
“Forget”.
3
Select this unit’s wireless network and enter the
new password.
Mac/PC:
≥
If the computer has memorized the old password,
be sure to change the memorized password for
this unit’s wireless network to the new one.
≥
Refer to the devices’s operating instructions for details.
*1: “ _ ” stands for a digit
*2: “ _ ” stands for a digit that is unique to each set.
*3: Steps are based on iOS 6.0.1.
Directly streaming to this unit
“PW _ _ _ _ _”*
1
is displayed.
The 5 digits after "PW" is the password for this
network.
̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
Display the password
Change the password
SC-HC58~RQT9754.book Page 12 Tuesday, December 18, 2012 4:40 PM