4
T
Q
BJ
207
4
Making the connections
Connect the AC mains lead only after all the other
connections have been made.
1
[HC302]
Connect the DAB indoor antenna.
Rotate the antenna at to improve reception.
Note:
•
Do not use any other DAB antenna except the supplied one.
•
Do not mount the DAB antenna on metal objects such as
water pipes or any metal parts of the building.
[HC300]
Connect the FM indoor antenna.
2
Connect the AC mains lead.
Do not use any other AC mains lead except the
supplied one.
Conserving power
The system consumes a small amount of power
(
~
17) even when it is in standby mode. Disconnect
the power supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Note:
•
These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced by
magnetism.
•
Tape the antenna to a wall with the least amount of
interference.
•
Use an outdoor antenna (not supplied) if reception is poor.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
Adhesive tape
(not supplied)
Be sure to
tighten the nut
fully.
Adhesive tape
(not supplied)
To household
mains socket
[HC300]
[HC302]
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 4 Friday, March 23, 2018 9:59 AM
