12
T
Q
BJ
207
4
Sound effects
1
Press [SOUND] repeatedly to select the sound
effect.
2
Press [
R
,
T
] to select the setting and then press
[OK].
Note:
Changed settings will be kept until it is changed again, unless
otherwise indicated.
Saving the sound settings
You can save the current sound effects (up to
3 combinations).
Preparation
Select the sound effects.
1
Press [SETUP] to select “SAVE MY SOUND”.
2
Press [
R
,
T
] to select a sound setting number and
then press [OK].
“SAVED” is shown.
The new setting replaces the one existing in the same
sound setting number.
To recall the setting
1
Press [SOUND] to select “MY SOUND”.
2
Press [
R
,
T
] to select the sound setting number
and then press [OK].
External music device
You can play music from an external music device.
Preparation
• Switch off the equaliser (if any) of the external music
device to prevent sound distortion.
• Decrease the volume of the system before you connect
or disconnect the external music device.
1
Connect the external music device using an audio
cable (not supplied).
Plug type: Ø 3.5 mm stereo
2
Press [RADIO/AUX] to select “AUX”.
3
Play the external music device.
To adjust the input level
1
Press [SOUND] repeatedly to select
“INPUT LEVEL”.
2
Press [
R
,
T
] to select “LOW” or “HIGH” and then
press [OK].
Note:
•
The default setting is “HIGH”.
•
Select “LOW” if the sound is distorted during “HIGH” input
level.
•
Read the operating instructions of the external music device
for details.
•
Components and cables are sold separately.
AUX IN auto play
The system will automatically switch to AUX source when
it detects the signal from an external music device.
This function also works in standby mode.
1
Press [SETUP] repeatedly to select “AUX-IN AUTO
PLAY”.
2
Press [
R
,
T
] to select “ON” and then press [OK].
To cancel, select “OFF”.
Note:
•
The default setting is “OFF”.
•
When the function is switched off and every time you switch
to AUX source, “AUX-IN AUTO PLAY IS OFF” will be shown
once.
•
This function does not work when the volume of the external
music device is low, increase its volume.
•
Stop or pause the external music device before you change
to other music source or to standby mode so as to prevent
the automatic switch to AUX source.
MY SOUND
“SOUND 1”, “SOUND 2” or
“SOUND 3” (
~
below)
PRESET EQ
“HEAVY”, “SOFT”, “CLEAR”,
“VOCAL” or “FLAT”
BASS
–4 to +4
TREBLE
–4 to +4
D.BASS
“ON D.BASS” or “OFF D.BASS”
SURROUND
“ON SURROUND” or
“OFF SURROUND”
CLEAR-MODE
DIALOG
“ON CLEAR-MODE DIALOG” or
“OFF CLEAR-MODE DIALOG”
Audio cable
(not supplied)
SC-HC302.300.GN.GS TQBJ2074 En_rev1.fm Page 12 Friday, March 23, 2018 9:59 AM
