15
RQT0A52
EN
GL
IS
H
You can connect to play sound from this unit to an
additional SC-CMAX5 unit.
1
Connect the additional SC-CMAX5 using an
audio cable (not supplied).
2
On the additional SC-CMAX5 unit:
Press [AUX] to select “AUX 1”.
3
On this unit:
Start your desired playback.
≥
The sound effect will be controlled separately by each unit.
Make the same sound settings on the additional unit if
necessary.
Using a microphone or
guitar
Preparation
≥
Decrease the volume of the system to its
minimum before you connect or disconnect a
microphone or guitar.
By the unit only
1
Connect a microphone or guitar.
≥
Plug type:
‰
6.3 mm monaural
≥
When connecting a guitar, ensure to connect it to
MIC 2/
jack.
2
(Only when MIC 2/
jack is connected)
Push [
B
MIC
C
] to select the correct
input setting.
Each time you push the button, the button position will
switch between pushed-down and released positions.
3
Adjust the volume of the microphone or guitar.
For microphone 1: Turn [MIC1-VOL].
For microphone 2 or guitar: Turn [VOL-MIC2/
].
4
If you want to sing with the background music:
Play the music source and adjust the volume of
the system.
≥
To sing along with the Karaoke features, refer to
“Karaoke”. (
l
16)
≥
If a strange noise (howling) is emitted, move the microphone/
guitar away from the speakers, or decrease the volume of
the microphone/guitar.
≥
Set the microphone/guitar volume to “MIN”, and disconnect
the microphone/guitar after use.
≥
This system cannot record from microphone or guitar.
Connecting to an additional
SC-CMAX5 unit
Additional SC-CMAX5
(rear)
Audio cable (not supplied)
This unit (rear)
≥
When a guitar is connected:
Ensure the button is at pushed-down position. (
C
)
≥
When a microphone is connected:
Ensure the button is at released position. (
B
MIC)
Incorrect setting may cause the sound to be too loud or too soft.
This unit (rear)
Microphone
(not supplied)
Microphone or
guitar
(not supplied)
e.g.
Audio cable
(not supplied)
15
SC-CMAX5_E~RQT0A52-R.book 15 ページ ２０１５年６月１２日 金曜日 午前１１時２２分
