20
VQT3M52
After completing “Easy setup”, you can perform “Network Easy
Setting”.
[BTT262]
Follow the on-screen instructions and make
the settings with [
2
,
1
] and press [OK].
[BTT362]
Select “Wired” or “Wireless” and press [OK].
∫
“Wired” connection
Follow the on-screen instructions to make your connection
settings.
≥
When you experience problems (
>
right)
∫
“Wireless” connection
Before beginning wireless connection setup
≥
Obtain your network name (SSID
*1
).
≥
If your wireless connection is encrypted please be sure
that you know your encryption key.
Select “WPS (PUSH button)” or “Search for
wireless network” and then follow the
on-screen instructions and make the settings.
WPS (PUSH button):
If your Wireless router supports WPS
(PUSH button), you can easily perform
the settings by pressing WPS button on it.
WPS (Wi-Fi Protected Setup) is a
standard that facilitates settings relating to
the connection and security of wireless
LAN devices.
1
Press WPS button or corresponding button of Wireless
router until the lamp starts flashing.
≥
For details, refer to the operating instruction of Wireless
router.
2
Press [OK].
Search for wireless network:
≥
When you select “Search for wireless network”, the available
wireless networks will be displayed. Select your network
name and press [OK].
– If your network name is not displayed search again by
pressing the red button on the remote control.
j
Stealth SSID will not be displayed when you select “Search
for wireless network”. Enter manually by using “Manual
setting”.
(Press [HOME]
>
select “Others”
>
select “Setup”
>
select
“Network”
>
[OK]
>
select “Network Settings”
>
[OK]
>
select “Wireless Settings”
>
[OK]
>
select “Connection
Setting”
>
[OK]
>
select “Manual setting”
>
[OK])
≥
If your wireless network is encrypted, Encryption Key input
screen will be displayed.
Input the encryption key of your network.
*1
An SSID (Service Set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID matches
for both devices.
*2
Wi-Fi Protected Setup-compatible Wireless router may have the mark.
[BTT362]
Wireless Settings
Network Easy Setting
OK
RETURN
Network Easy Setting
Wired
Wireless
Select a connection mode.
Current setting
: Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired."
Wireless LAN connection:
Select "Wireless."
Wireless Settings
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
*
2
e.g.,
When you experience
problems with settings
Display
Check the following
A conflict with other
devices occurred.
≥
Please wait a few moments, and
then try again.
A time out error
occurred.
≥
Setting of the Wireless router for
MAC Address etc.
≥
The signal may be weak.
≥
The SSID and the encryption key
of the Wireless router.
≥
Please wait a few moments, and
then try again.
An authentication
error or a time out
error occurred.
A device error
occurred.
≥
If there is no improvement in
symptom, consult your dealer.
OK
Wireless Settings
Failed to complete.
A conflict with another device occurred.
Do you want to configure wireless network connection
setting again ?
Yes
No
SCBTT362_262_EB_VQT3M52_eng.book 20 ページ ２０１１年１月２５日 火曜日 午後８時２２分