Panasonic SC-BT205, Руководство по эксплуатации

Страница: 43 / 120

43
RQT9516
Speaker installation
option
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 k
g
per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and speakers.
1 Turn on the wireless system.
2 Turn on the main unit.
The wireless link indicator on the main unit will be turned on.
3 Start play on the main unit.
≥
For optimal audio output, it is recommended to
re-configure the main unit using SMART SETUP. (
>
14)
≥
You cannot use the wireless system with SH-FX65T or
SH-FX67T digital transmitter.
WIRELESS LINK
Unit on/off button [
C
I,
B Í
]
Use this button to turn the unit on and off.
C
I: The unit is on.
B Í
: The unit is off.
WIRELESS LINK indicator
Red: The unit is on and the wireless link is deactivated.
Turn off and on the wireless system.
Green: The unit is on and the wireless link is activated.
SLP STCT
RDS RND PGM
EQ
PRG SRDE.
PL DDTS
W2 WS
W1
≥ If the indicator is flashing, refer to the
“Optional wireless system (SH-FX70)”
Page in the Troubleshooting guide.
(
>
51)
e.g.
NOTE
Attaching to a wall
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
Reattaching the speaker cables

4.0 mm

7.5 mm to 9.4 mm
At least 30 mm
3 mm to 5 mm
Wall or pillar
DO
NOT
DO
Attach to a wall without the base and the stand
72 mm
348.5 mm
In this position,
the speaker will
likely fall if
moved to the
left or right.
Move the
speaker so that
the screw is in
this position.
Front and surround speaker
Center speaker
190 mm
Insert the cable
from the bottom. Pull out the cable
through the hole.
Leave about
120 mm
43
Optional speaker
settings
SCBT205EP-RQT9457-R.book 43 ページ ００９年５月 日 金曜日 午後 時 分