40
SQT0935
“DL ERROR”
The firmware download has failed. Press [OK] to
exit. Please try again later.
“FAIL”
Setting has failed. Read the instructions and try
again.
“LINKING”
≥
This system is trying to connect to the last
connected Bluetooth
®
device when
“BLUETOOTH” is selected.
≥
This system is communicating with the
wireless router to complete the network
settings.
Depending on the wireless router this process
may take a few minutes. Try moving this
system closer to the wireless router.
“NO CONNECT”
This system cannot connect to the network.
Check the network connection. (
>
19)
“REMOTE
” (“
” stands for a number.)
The remote control and this system are using
different codes. Change the code on the remote
control. (
>
23)
“WIRED LAN”
Connection to the network is via a wired LAN
connection.
≥
When setting up wireless connection, disconnect the
LAN cable from this system.
“WIRELESS LAN OFF”
The wireless LAN function on this system is
disabled.
≥
When setting up wireless connection, set the
“WIRELESS LAN” setting to “ON”. (
>
31)
“WAIT”
≥
This is displayed, for example, when this
system is turning off.
≥
This is flashing when the system is trying to
enter a network setting mode.
“
” blinks
≥
This may occur when, for instance, the
network connection is interrupted.
About Bluetooth
®
∫
Frequency band used
This system uses the 2.4 GHz frequency band.
∫
Certification of this device
≥
This system conforms to frequency
restrictions and has received certification
based on frequency laws. Thus, a wireless
permit is not necessary.
≥
The action below are punishable by law in
some countries:
j
Taking apart or modifying the unit.
j
Removing specification indications.
∫
Restrictions of use
≥
Wireless transmission and/or usage with all
Bluetooth
®
equipped devices is not
guaranteed.
≥
All devices must conform to standards set by
Bluetooth SIG, Inc.
≥
Depending on the specifications and settings
of a device, it can fail to connect or some
operations can be different.
≥
This system supports Bluetooth
®
security
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data
wirelessly to this system with caution.
≥
This system cannot transmit data to a
Bluetooth
®
device.
∫
Range of use
Use this device at a maximum range of 10 m.
The range can decrease depending on the
environment, obstacles or interference.
∫
Interference from other devices
≥
This system may not function properly and
troubles such as noise and sound jumps may
arise due to radio wave interference if the main
unit is located too close to other Bluetooth
®
devices or the devices that use the 2.4 GHz band.
≥
This system may not function properly if radio
waves from a nearby broadcasting station,
etc. are too strong.
∫
Intended usage
≥
This system is for normal, general use only.
≥
Do not use this system near equipment or in
an environment that is sensitive to radio
frequency interference (example: airports,
hospitals, laboratories, etc.).
Panasonic bears no responsibility for data
and/or information that is compromised
during a wireless transmission.
SC-ALL70T-SQT0935.book 40 ページ ２０１５年４月２８日 火曜日 午前１０時５分
