8
SQT1211
≥
The following steps are based on a
smartphone.
≥
Do not connect a LAN cable. Doing so will
disable the Wi-Fi function.
1 Turn this unit on.
2 Go to Wi-Fi settings on the device.
≥
Proceed to the next step after the network indicator
changes from blinking in blue and red to blinking
slowly in blue
§
.
§
The blinking in blue starts after approximately
1 minute. If the blinking in blue does not start,
perform a network reset. (
l
9)
3 Select “AllPlay
_AJ” to
connect to this unit.
≥
“
” stands for a character that is unique to each set.
≥
This can take up to 1 minute to appear in your Wi-Fi
list.
≥
If this operation does not work correctly, please
repeat it several times.
≥
Make sure that DHCP is enabled for the network
setting on your compatible device.
[iOS_device]
: The settings page will be automatically
displayed in the Internet browser.
[Except_iOS_device]
: Open the Internet browser and
refresh the page to display the settings page.
≥
If the settings page is not displayed, type “http://
172.19.42.1/” into the URL address field.
4 Type a device name and then select
“Next”.
≥
The device name will be displayed as this unit’s
name on the network.
≥
The guaranteed limit is 32 characters.
≥
The device name is set when “Next” is selected.
≥
You can also change the device name after the
network connection is set up. (
l
10)
5 Select your network name (SSID)
and type the password.
≥
Check the wireless router for the network name
(SSID) and the password.
≥
A list of network names (SSIDs) will be appeared
when you select the “Network Name” box.
≥
To show the characters typed in the “Password”
box, select “Show Password”.
≥
If your network requires specific settings, deselect
“DHCP” to disable DHCP.
– You can use specific IP address, subnet mask,
default gateway, primary DNS, etc.
≥
To update the network name (SSID) list, select
“Refresh list”.
6 Select “Connect” to apply the
settings.
≥
When the connection is established, the network
indicator (blue) lights up.
≥
Depending on the device, the connection complete
screen may not be displayed.
7 Make sure to connect your
compatible device back to your
home wireless network.
≥
Enable Java and cookies in your browser settings.
Using an Internet browser
Settings
Wi-Fi Settings
AllPlay
If the network indicator does not light up,
check the network name (SSID) and the
password, and then try the setting again.
* Network Name
Refresh list
* Password
Show Password
DHCP
●●●●●●●●
SC-ALL9&6-SQT1211_mst.book 8 ページ ２０１６年１月１２日 火曜日 午後３時１６分
