Panasonic SC-AKX50, Руководство по эксплуатации

Страница: 22 / 28

22
RQT804
RQTX1097
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
Using sound effects
Changing the sound quality:
Preset EQ
Press [PRESET EQ] repeatedly to select
your desired setting
.
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
FLAT No effect
Changing the sound quality:
Manual EQ
1
Press [MANUAL EQ] repeatedly to select
your desired setting.
BASS For lower pitch sound
MID For middle pitch sound
TREBLE For higher pitch sound
2
Press [
2
/
3
] or [
5
/
6
] to adjust
the level.
Note:
•
The level of the pitch is between -4 to +4.
•
The changes you make are stored and
automatically recalled the next time you select
“MANUAL EQ”.
Enhancing the stereo sound:
SURROUND sound
Enables you to add natural width and depth to the
stereo sound.
To activate
Press and hold [− SURROUND] to display
“
” indicator.
To cancel
Press and hold [− SURROUND] again to clear
“
” indicator.
Note:
•
Surround sound is less discernible when listening
through headphones.
•
If interference in FM stereo reception increases,
cancel the surround sound effect.
7
Press [
R
/
T
] to select the desired
recording storage location.
8
Press [OK] to confi rm.
To activate the timer
9
Press [
#
PLAY/REC] repeatedly to turn
on your desired timer.
#
PLAY
#
REC
No display (off)
10
Press [
`
] to turn off the unit.
The unit must be turned off for the timer to
operate.
Change the
settings Repeat steps 1 to 8 and 10
(
Z page 21 and above).
Change the
volume
1) Press [
#
PLAY/REC] to clear the
timer indicator from the display.
2) Make changes to the volume.
3) Perform steps 9 and 10.
Check the
settings Press [CLOCK/TIMER] repeatedly to
select
#
PLAY or
#
REC.
Cancel Press [
#
PLAY/REC] to clear the
timer indicator from the display.
Note:
•
The play timer will start at the preset time with
volume increasing gradually to preset level.
•
The record timer will start 30 seconds before the
set time with the volume muted.
•
The timer comes on at the set time every day if the
timer is on.
•
The unit must be in the standby mode for the timer
to function.
•
If you turn the unit off and on again while a timer
is functioning, the fi nish time setting will not be
activated.
AKX50_EB_EN.indd 22 AKX50_EB_EN.indd 22 6/8/2010 5:25:28 PM 6/8/2010 5:25:28 PM