13
12
ENGLISH
RQTX0192
13
12
Preparation
Ensure disc tray is empty.
Press and hold [CD
q
/
h
] on the main unit and then press and hold
[2] (or [1]) on the remote control.
“REMOTE 2” (or “REMOTE 1”) is displayed.
The USB connectivity enables you to connect and play MP3 tracks from
USB mass storage class. Typically, USB memory devices. (Bulk only
transfer)
Preparation
Before connecting any USB mass storage device to the unit, ensure that
the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The device
connected via the cable will not be recognised by this unit.
1
Reduce the volume and connect the USB mass storage device.
2
Press [USB
q
/
h
] or [OK] to start play.
To
Action
pause play
Press [USB
q
/
h
].
Press again to resume play.
stop play
Press [
g
].
“RESUME” is displayed. The position is memorized.
Press [USB
q
/
h
] to resume.
Press [
g
] again to clear the position.
skip track
Press [
w
,
q
].
skip album
Press [
e
,
r
] in the play mode.
Press [
e
,
r
] once and then the numeric buttons in
the stop mode.
Devices which are defined as USB mass storage class:
USB devices that support bulk only transfer.
USB devices that support USB 2.0 full speed.
•
•
Files must have the extension “.mp3” or “.MP3”.
DEMO
VOLUME
VOLUME
OPEN/CLOSE
D.BASS
BASS
TREBLE
_
+
/
iPod
/
USB
/
CD
FM/AM
POWER
USB enabled device
(not included)
CBI (Control/Bulk/Interrupt) is not supported.
A device using NTFS file system is not supported [Only FAT12/16/32
(File Allocation Table 12/16/32) file system is supported].
Depending on the sector size, some files may not work.
This unit can access up to 255 albums (including blank folders) and
2500 tracks.
The maximum number of tracks in a folder are 999 tracks.
Only one memory card will be selected when connecting a multiport
USB card reader. Typically the first memory card inserted.
Do not unplug the USB device during reading or playback.
Disconnect the USB card reader from the unit when you remove the
memory card. Failure to do so may cause malfunction to the device.
When you connect a compatible digital audio player to the USB port,
charging may be activated. It will not charge when the unit is switched
to standby mode or iPod mode.
•
•
•
•
•
•
•
•
•
Press [DISPLAY] repeatedly during play or pause mode.
Press and hold [OK] and [2] (or [1]) on the remote control for at
least 2 seconds.
If the remote control and main unit are using different codes, a message
appears on the main unit’s display showing the main unit’s current code.
Follow the above step to change the remote control’s code to match it.
Change the code if you find the remote control unintentionally also
controls other equipment.
Using other equipment
(continued)
Note
USB mass storage class device
Changing the remote control code
Change the main unit’s code
Change the remote control’s code
Compatible devices
Supported format
For other operating functions, they are similar to those described in
“Discs” (
➡
page 7 and 8).
Press [MP3 INFO] repeatedly during play or pause mode.
ID3 (Artist)
ID3 (Track)
ID3 (Album)
Elapsed play time
MP3
Display function
MP3
INFO
12
13
Elapsed play
time
Folder name
Track name
Remaining play
time
SC-PM38_PP_En_081230 (pg 1-17).indd 13
2/25/2009 4:28:46 PM
