25
Installation Instructions
6
Thread a cord (not supplied) through the wall mount bracket.
≥
Use a cord which is capable of supporting over 20 k
g
(44.1 lbs).
A
Rear of this unit
B
Fall prevention cord (not supplied)
7
Attach the lock pins into the wall mount bracket.
≥
The lock pins are designed to lock the wall mount brackets to the screws that this unit is attached to.
Hence, preventing this unit from falling off the screws.
≥
Keep the lock pins out of reach of children to prevent swallowing.
≥
Insert the lock pins as illustrated in the image below.
≥
Make sure that the lock pin does not get caught on the fall prevention cord.
A
Do not insert the lock pin farther than this point.
8
Drive 2 screws (not supplied) into the screwing positions identified in step 4.
A
At least 30 mm (1
3
/
16
q
)
B
‰
4.0 mm (
5
/
32
q
)
C
‰
7.8 mm to
‰
9.4 mm (
5
/
16
q
to
13
/
32
q
)
D
Wall
E
5.0 mm to 6.0 mm (
3
/
16
q
to
1
/
4
q
)
≥
Take care when fixing this unit to the wall. Always ensure that there are no electrical cables or pipes
in the wall before hanging this unit.
≥
Keep the screws out of reach of children to prevent swallowing.
≥
Be sure to use commercially available screws with nominal diameter of
‰
4.0 mm (
5
/
32
q
) suited to the wall surface material
(wood, steel frame, concrete, etc.) and also capable of supporting over 20 k
g
(44.1 lbs) each for attaching this unit to the
wall.
≥
The position in the wall where the screw is to be attached should be capable of supporting over 20 k
g
(44.1 lbs).
≥
Improper attachment may result in damage to the wall and this unit.
Attaching this unit to a wall
SCHTB50_10PPC_RQTX1165-P.book Page 25 Monday, May 10, 2010 11:58 AM
Содержание SAHTB10 - HOME THEATER AUDIO SYSTEM
Страница 27: ...27 Installation Instructions ...
