Panasonic SAHTB10 - HOME THEATER AUDIO SYSTEM, Руководство по эксплуатации

Страница: 15 / 28

15
Operating Instructions
Specifications
Dimensions (W
k
H
k
D):
(Without wall mount bracket)
800 mm
k
108 mm
k
58 mm
(31 1 /
2
qk
4 1 /
4
qk
2 9 /
32
q
)
(With wall mount bracket)
800 mm
k
108 mm
k
80 mm
(31 1 /
2
qk
4 1 /
4
qk
3 5 /
32
q
)
Mass (Weight):
(Without wall mount bracket)
Approx. 3.2 k
g
(7.1 lbs)
(With wall mount bracket)
Approx. 3.3 k
g
(7.3 lbs)
Operating temperature range:
0
o C to
r
40 o C (
r
32 o F to
r
104 o F)
Operating humidity range:
20 % to 80 % RH (no condensation)
RMS Output Power
Front ch:
30 W per channel (4
≠
), 1 kHz, 10 % THD
Subwoofer ch:
30 W per channel (4
≠
), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power: 120 W
FTC Output Power
Front ch: 20 W per channel (4
≠
),
120 Hz to 20 kHz, 1 % THD
Subwoofer ch: 20 W per channel (4
≠
),
40 Hz to 120 Hz, 1 % THD
Total FTC Dolby Digital mode power: 80 W
FRONT SPEAKERS (BUILT-IN)
Type: 1 way 1 speaker system (Bass Reflex)
Full range: 6.5 cm (2 1 /
2
q
) Cone type
k
2
SUBWOOFER (BUILT-IN)
Type: 1 way 1 speaker system (Bass Reflex)
k
2
Woofer: 8 cm (3
1
/
8
q
) Cone type
k
2
HDMI
This unit supports “HDAVI Control 5” function.
HDMI input
Input connector: Type A (19 pin)
HDMI AV output
Output connector: Type A (19 pin)
Digital Audio Input (TV only)
Optical digital input: Optical terminal
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: LPCM, Dolby Digital
IR Blaster
Terminal 1: 3.5 mm ( 1 /
8
q
) jack
1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital spectrum
analyzer.
Audio information
∫
Compatible audio formats
This unit is compatible with the following formats:
Dolby Digital, DTS Digital Surround, 2-channel
LPCM and multi-channel LPCM.
≥
When using the optical digital audio cable, this
system is not able to play audio with a sampling
frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will be
automatically canceled if the audio signal’s
sampling frequency is greater than 48 kHz.)
GENERAL
Power consumption: 25 W
Power consumption in standby mode:
Approx. 0.1 W
Power supply: AC 120 V, 60 Hz
AMPLIFIER SECTION
SPEAKER SECTION
TERMINAL SECTION
SCHTB50_10PPC_RQTX1165-P.book Page 15 Monday, May 10, 2010 11:58 AM