21
RQTX0175
Remote control operation guide/Specifications
Changing the remote control code
Change the code if you find the
remote control unintentionally also
controls other Panasonic equipment.
Do the following to set the remote
control code and this unit’s remote
control mode to the same one.
Change the main unit’s mode
Change the remote control’s code
To restore the code to “1”
On the main unit: In step 3, select
“1”
.
On the remote control: In step 6, while
pressing [OK], press and hold [1] for about
2 seconds.
•
•
1. Enter the SETUP menu.
Press and hold
.
2. Select and press [ENTER].
3. Select and press [ENTER].
4. Press [-MENU, –SETUP, RETURN]
repeatedly to select “EXIT” and
press [ENTER].
MENU
RETURN
SETUP
5. Press
.
6. While pressing
, press and
hold
for about 2 seconds.
Remote control operation guide
Specifications (IHF’78)
g
AMPLIFIER SECTION
RMS Output Power of each channel driven
10 % total harmonic distortion
1 kHz Front CH
125 W per channel (3
Ω
)
1 kHz Surround CH
125 W per channel (3
Ω
)
1 kHz Center CH
250 W per channel (6
Ω
)
100 Hz Subwoofer CH
250 W per channel (6
Ω
)
Total RMS Output Power
1000 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Dolby Digital mode)
120 Hz to 20 kHz Front CH
53 W per channel (3
Ω
)
120 Hz to 20 kHz Surround CH
53 W per channel (3
Ω
)
120 Hz to 20 kHz Center CH
133 W per channel (6
Ω
)
45 Hz to 120 Hz Subwoofer CH
141 W per channel (6
Ω
)
Total FTC Output Power
486 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Stereo mode)
120 Hz to 20 kHz Front CH
52 W per channel (3
Ω
)
45 Hz to 150 Hz Subwoofer CH
141 W per channel (6
Ω
)
Total FTC Output Power
245 W
Total harmonic distortion
half power at 1 kHz (Front CH)
0.5 % (3
Ω
)
Input sensitivity
DVD-P, TV, BD/DVR
450 mV, IHF'66
S/N at rated power
DVD-P, TV, BD/DVR
80 dB
Input impedance
DVD-P, TV, BD/DVR
47 k
Ω
Tone controls
BASS
50 Hz, +6 dB to -6 dB
TREBLE
20 kHz, +6 dB to -6 dB
Analog input/output
Analog audio input
3
Wireless Ready
SH-FX67
g
OPERATING CONDITION
Operating temperature range
0°C to +40°C (+32°F to +104°F)
Operating humidity range
20% to 80% RH (no condensation)
g
FM TUNER SECTION
Frequency range
87.9 MHz to 107.9 MHz
Sensitivity
11.2 dBf (2 µV), IHF'58
Total harmonic distortion
MONO
0.3%
STEREO
0.4%
S/N
MONO
64 dB
STEREO
63 dB
Antenna terminal
75
Ω
(unbalanced)
g
AM TUNER SECTION
Frequency range
530 kHz to 1710 kHz
g
SPEAKER SECTION
Rating with low-cut filter equipped Amplifier
Front speaker (SB-HF56)
Type
1 Way, 1 Speaker
Speaker unit
Full range
6.5 cm (2
1
/
2
") cone type
Input power (IEC)
125 W
(Max/3
Ω
)
Output sound pressure
80 dB/W (1.0 m)
Frequency range
86 Hz to 25 kHz (-16 dB)
98 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
92 mm x 272 mm x 95 mm
(3
5
/
8
" x 10
23
/
32
" x 3
3
/
4
")
Weight
0.74 k
g
(1.6 lb.)
Surround speaker (SB-HS760)
Type
1 Way, 1 Speaker
Speaker unit
Full range
6.5 cm (2
1
/
2
") cone type
Input power (IEC)
125 W
(Max/3
Ω
)
Output sound pressure level
80 dB/W (1.0 m)
Frequency range
95 Hz to 25 kHz (-16 dB)
120 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
92 mm x 142 mm x 95 mm
(3
5
/
8
" x 5
19
/
32
" x 3
3
/
4
")
Weight
0.6 k
g
(1.32 lb.)
Center speaker (SB-HC760)
Type
2 Way, 2 Speakers
Speaker unit
Full range
6.5 cm (2
1
/
2
") cone type x 2
Input power (IEC)
250 W
(Max/6
Ω
)
Output sound pressure level
82 dB/W (1.0 m)
Crossover frequency
5 kHz
Frequency range
80 Hz to 25 kHz (-16 dB)
96 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
270 mm x 94 mm x 95 mm
(10
5
/
8
" x 3
11
/
16
" x 3
3
/
4
")
Weight
1.3 k
g
(2.9 lb.)
Subwoofer (SB-HWX50)
Type
1 Way, 1 Speaker
Speaker unit (Woofer)
16 cm (6
1
/
2
") cone type
Input power IEC
250 W (Max/6
Ω)
Output sound pressure level
78 dB/W (1.0 m)
Frequency range
35 Hz to 200 Hz (-16 dB)
40 Hz to 198 Hz (-10 dB)
Dimensions (W x H x D)
181 mm x 361 mm x 315 mm
(7
1
/
8
" x 14
7
/
32
" x 12
13
/
32
")
Weight
4.7 k
g
(10.4 lb.)
g
GENERAL
Power supply
AC 120 V, 60 Hz
Power consumption
125 W
Dimensions (W x H x D)
430 mm x 105 mm x 388 mm
(16
15
/
16
" x 4
1
/
8
" x 15
9
/
32
")
Weight
4 k
g
(8.8 lb.)
Power consumption in standby mode:
HDMI On:
0.7 W
HDMI Off:
0.3 W
Notes:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
Digital input/output:
HDMI Input
2
HDMI Output
1
Optical digital input
2
Coaxial digital input
1
SC-HT56P_MP (RQTX0175-2P).indb 21
9/19/2008 12:29:08 PM