42
RQT9129
Troubleshooting guide
When other Panasonic products respond to this remote control
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close
together.
Disc and card handling
Clean discs
Wipe with a damp cloth and then wipe dry.
Disc and card handling precautions
≥
Handle discs by the edges to a
v
oid inad
v
ertent scratches or
fingerprints on the disc.
≥
Do not attach labels or stickers to discs (This may cause disc
warping, rendering it unusable).
≥
Do not write on the label side with a ball-point pen or other writing
instrument.
≥
Do not use record cleaning sprays, benzine, thinner, static electricity
pre
v
ention liquids or any other sol
v
ent.
≥
Do not use scratch-proof protectors or co
v
ers.
≥
Clean any dust, water, or foreign matter from the terminals on the
rear side of the card.
≥
Do not use the following discs:
– Discs with exposed adhesi
v
e from remo
v
ed stickers or labels
(rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
Maintenance
Clean this unit with a soft, dry cloth
≥
Ne
v
er use alcohol, paint thinner or benzine to clean this unit.
≥
Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens o
v
er time, making it
impossible to play discs.
Use the lens cleaner (not included) about once e
v
ery year, depending
on frequency of use and the operating en
v
ironment. Carefully read the
lens cleaner’s instructions before use.
1
Press [BD/SD] to select “BD/DVD/CD” or “SD”.
2
While stopped, press [SETUP].
3
Press [
3
,
4
] to select “Setup” and press [OK].
4
Press [
3
,
4
] to select “Remote Control Code”
and press [OK].
5
Press [
3
,
4
] to select the code (1 or 2) and
press [OK].
6
To change the code on the remote control
While pressing [OK], press and hold the
numbered button ([1] or [2]) for more than
5 seconds.
7
Press [OK].
When the following indicator
appears on the unit’s display and
you are unable to operate the unit
Press and hold [OK] and the
indicated number button at the same
time for more than 5 seconds.
Remote Control Code
Press [
] and [OK] together
for more than 5 seconds on
the remote.
Set Code 1
Set Code 2
NOTE
The unit’s remote control code
DO
DO NOT
Lens cleaner: RP-CL720PP
≥
This lens cleaner is sold as specific for DIGA, but can be used
without problem on this unit as well.
Ja
v
a and all Ja
v
a-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and
other countries.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” is a registered trademark of DTS, Inc. and “DTS-HD Master Audio” ia a trademark of DTS, Inc.
U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and 5,583,936.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macro
v
ision, and is intended for home and other limited
v
iewing uses only unless
otherwise authorized by Macro
v
ision. Re
v
erse engineering or disassembly is prohibited.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a
consumer to (i) encode
v
ideo in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1
Video that was encoded by a consumer engaged in a personal and non-commercial acti
v
ity and/or was obtained from a
v
ideo pro
v
ider
licensed to pro
v
ide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
HDAVI Control™ is a trademark of Matsushita Electric Industrial Co., Ltd.
VIERA Link™ is a trademark of Matsushita Electric Industrial Co., Ltd.
EZ Sync™ is a trademark of Matsushita Electric Industrial Co., Ltd.
“AVCHD” and the “AVCHD” logo are trademarks of Matsushita Electric Industrial Co., Ltd. and Sony Corporation.
SDHC Logo is a trademark.
Portions of this product are protected under copyright law and are pro
v
ided under license by ARIS/SOLANA/4C.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
SC-BT100P-ENG.book 42 ページ ２００８年２月２０日 水曜日 午後６時２２分
