69
Caution: Ensure pins of the Audio Digital Power Amp IC
(IC5000) are properly seated and soldered on D-Amp P.C.B.
Step 5 Position the bottom chassis portion in to the curves
according to the diagram shown. (Rotate the part at 180
degrees as compared to its original position)
Step 6 Screw the portion to the bottom chassis.
9.17. Replacement of Audio Digital
Power Amp IC (IC5200)
9.17.1.
Disassembly of Audio Digital
Power Amp IC (IC5200)
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 2) of Item 9.16.
Step 1 Desolder pins of the Audio Digital Power Amp IC
(IC5200) on the solder side of D-Amp P.C.B.
Step 2 Remove 1 screw.
Step 3 Remove the TR spring in the direction of arrows.
Step 4 Remove the Audio Digital Power Amp IC (IC5200) from
the D-Amp P.C.B.
Caution: Handle the D-Amp P.C.B. with care due to its high
temperature after prolonged use. Touching it may lead to
injuries.
Note: Refer to the diagrams of D-Amp P.C.B. (Item 18.4.) for
location of the electrical components.
Содержание SA-PT875GA
