Panasonic SA-PT875GA, Руководство по обслуживанию

Страница: 34 / 165

34
6.3. Wireless Service Mode Summary Table
The service modes can be activated by pressing various button combination on the player and remote control unit.
Below is the summary of major checking:
Note:
Main room refers to the location of the main unit.
6.4. Service Mode Table (Wireless)
By pressing various button combinations on the player and remote control unit, you can activate the various service modes for
checking.
6.4.1. Service Mode Table 1
Player buttons Remote control unit buttons Application Note
FAST FORWARD 3 ID setting (Refer to the section
“6.4.1. Service Mode
Table 1” for more informa-
tion).
STOP
(only in AUX)
4 RF channel 1 display (Refer to the section
“6.4.2. Service Mode
Table 2” for more informa-
tion).
5 RF channel 2 display
6 RF channel 3 display
7 Auto RF channel display
FL Display
Key Operation
Front Key
Item
Description Mode Name
ID Setting
In CD/DVD mode.
Press and hold [FAST
FORWARD] button on the
main unit, and [3] button
on the remote control unit.
Press the on main
unit or remote control.
W1
To set the ID in the Tx & Rx. The
system goes into "Pairing Mode".
[P] will be displayed for 60 seconds to
indicate it is in "Pairing Mode".
During this condition, the "ID set"
button on the receiver unit can be
pressed to pair the Tx & Rx.
After 60 seconds, the FL display will
return to its previous display.
Note: Carry out pairing when Tx or Rx
has been changed.
W1
Note : will blink when a new transmitter
card is inserted or when the Receiver
module P.C.B.(Rx) had been changed.
It will stopped when pairing is completed.