T
Q
BJ09
97
10
To find the best antenna position, use manual tuning to
search selected DAB/DAB+ frequency block.
1
Press [RADIO MENU] repeatedly to select
“MANUAL SCAN”.
2
Press [
2
,
1
] to select a frequency block to scan
and then press [OK].
You can preset up to 20 DAB/DAB+ stations.
1
Press [
6
] or [
5
] to select a station.
• Alternatively, press [
:
/
6
] or [
5
/
9
] on this
unit when “STATION” is selected as the tune mode*
1
.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
Note:
• A station previously stored is overwritten when another
station is stored in the same preset number.
• You cannot preset a station when the station is not
broadcasting or when you have selected a secondary
service.
• Previous station memory is cleared during auto scan.
Press the numeric buttons, [
:
] or [
9
] to select
the preset station.
• Alternatively, press [
:
/
6
] or [
5
/
9
] on this unit
when “PRESET” is selected as the tune mode*
1
.
*1: To change the tune mode
1 Press [RADIO MENU] repeatedly to select “TUNE
MODE”.
2 Press [
2
,
1
] to select “STATION” or “PRESET”, and
then press [OK].
You can view information about the DAB/DAB+
broadcast, programme type, ensemble label, frequency
and time.
Press [DISPLAY] to view available information.
1
Press [RADIO MENU] repeatedly to select an
option.
2
Press [
2
,
1
] to select the desired setting and
then press [OK].
When adjusting the antenna, you can check the
reception quality.
1
Press [RADIO MENU] repeatedly to select
“SIGNAL QUALITY”.
2
Press
[
2
,
1
]
to select frequency.
The current frequency block is displayed and then
the reception quality is indicated.
Clock and timers
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
2
Press [
3
,
4
] to set the time and then press [OK].
To check the time
Press [CLOCK/TIMER].
Note:
• Reset the clock regularly to maintain accuracy.
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to select the setting (in
minutes).
Note:
• The remaining time is indicated on the unit’s display at
every minute except when other operations are performed.
“SLEEP 1” is always shown when only 1 minute remains.
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
“TIMER ADJ”.
2
Press [
3
,
4
] to set the starting time (“ON TIME”)
and then press [OK].
3
Press [
3
,
4
] to set the finishing time
(“OFF TIME”) and then press [OK].
4
Press [
3
,
4
] to select the music source*
1
and
then press [OK].
DAB/DAB+ manual tuning
Memory presetting
Selecting a preset station
Viewing available information
DAB/DAB+ settings
DAB SECONDARY
PRIMARY
To listen to primary service.
SECONDARY
To listen to secondary services.
“
” is shown.
AUTO CLOCK ADJ
ON ADJUST
Start auto clock adjustment.
OFF ADJUST
Cancel auto clock adjustment.
DAB/DAB+ signal quality
Reception quality
0 (poor) to 8 (excellent)
Setting the clock
Sleep timer
Play timer
“SLEEP 30”
-.
“SLEEP 60”
-.
“SLEEP 90”
-.
“SLEEP 120”
^-------------------
“OFF” (Cancel)
(------------------b
SA-PMX82-M~TQBJ0997.book 10 ページ ２０１７年４月１４日 金曜日 午前９時５８分
Содержание SA-PMX82M
Страница 15: ...15 TQBJ0997 SA PMX82 M TQBJ0997 book 15...
