Panasonic SA-PMX100EG Скачать руководство пользователя

Страница: 13 / 74

6.3.

Doctor Mode

6.3.1.

Doctor Mode Table 1

Item

FL Display

Key Operation

Mode Name

Description

Front Key

Doctor Mode

(Display 1)

(Display 2)

The SDK version will be display for 2 sec.

In any mode:
Press

[ ]

button on main unit follow by

[4] & then [7] on the remote control.

•

To exit Doctor Mode, press

[DEL]

button on the remote control without

power off.

• Unplug the AC cord.

In Doctor mode:
Press

[1]

button on the remote control.

To cancel, press [0] button on remote
control. [CANCEL] will be display and
returns to Doctor Mode.

•

To exit Doctor Mode, press

[DEL]

button on the remote control without

power off.

• Unplug the AC cord.

(Display 3)

The Checksum of EEPROM and firmware
version will be display for 2 sec.

To enter into Doctor Mode for
checking of various items and
displaying EEPROM check sum
and Opecon firmware version

Note: The Opecon firmware
version as shown is an example.
It will be revised when there is
updates.

Displaying of
1. Year of sales.
2. Model type.
3. ROM type.
4. Opecon version number.
5. SDK version.
6.

AllPlay

version.

FL Display sequence Display
1

FL Display Test

To check the FL segments
display (All segments will light
up)

In Doctor Mode:

Press [

] follow by [2] & then [1]

button on the remote control.

To check the Loading Reliability
of tray.

CD Tray
Reliability

•

To exit Doctor Mode, press

[DEL]

button on the remote control without

power off.

• Unplug the AC cord.

To cancel, press [0] button on remote
control. [CANCEL] will be display and
returns to Doctor Mode.

(Display 4)

Model Name

PMX70

PMX100

PMX70B

PMX100B

Содержание SA-PMX100EG











































































Результаты поиска

Содержание SA-PMX100EG

Отзывы:

Похожие инструкции для SA-PMX100EG

Бренды по названию

Популярные бренды

Panasonic SA-PMX100EG, Руководство по обслуживанию

Результаты поиска

Содержание SA-PMX100EG

Отзывы:

Похожие инструкции для SA-PMX100EG

Бренды по названию

Популярные бренды