Item
Status and Key Function
Display
Checking DVD, CD laser usage
time
With the unit stopped and no disc
inserted, press the.
button
on the player and the
button
on the remote controller unit.
T1_xxxx_yyyy / xxxx(DVD), yyyy(
total time is displayed with a four
digit number by the ten hours.
Checking spindle motor usage
time
With the unit stopped and no disc
inserted, press the
button on
the player and the
button on
the remote controller unit.
T2_xxxx / xxxx: total time is displayed
with a four-digit number by the
hours.
Resetting DVD, CD laser usage
time
While the DVD and CD laser usage
times are displayed, press the
button on the player and the
button on the remote
controller unit.
T1_0000_0000
Resetting spindle motor usage
time
While the spindle motor usage
time is displayed, press the
button on the player and the
button on the remote controller
unit.
T2_0000
14.2.1. Cautions to be taken during replacement of optical pickup
Optical pickup could be damaged due to the static electricity discharged from human body. Wear
proper protection gear against static electricity during optical pickup and its peripheral repair.
(Refer to “Cautions to Be Taken When Handling Optical Pickup”.)
- Do not touch laser diode, actuator and their peripherals.
- Do not check laser diode with a tester and such. (The tester will be
destroyed.)
- For short-circuiting or removing laser diode, the use of an anti-
static soldering iron is recommended. (Recommended model:
HAKKO ESD product)
- Solder the land of the flexible cable in the optical pickup.
Note:
If an anti-static soldering iron is not available, short-circuit the terminal surface of the flexible
cable and then the land using a clip or equivalent device.
23
Содержание SA-HT530EB
