21
RQT8291
∫
AM frequency step
The step is factory-set to 9 kHz, but you can change it to receive
broadcasts allocated in 10-kHz steps.
1 Press [INPUT SELECTOR]
to select “FM”.
2 Press and hold [INPUT SELECTOR].
After a few seconds, the display changes to show the current
minimum frequency. Continue to hold the button down. The
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
[Note]
After changing the setting, previously preset frequencies will be
cleared.
Use outdoor antennas if radio reception is poor.
≥
Disconnect the antenna when the unit is not in use.
≥
Do not use the outdoor antenna during an electrical storm.
Main unit only
Optional antenna connections
TV
AUDIO
IN
TV
TV
AUDI
UDIO
IN
IN
TV
AUDIO
IN
AM
ANT
LOOP
EXT
FM ANT
(75
)
AM outdoor antenna
(Using a vinyl wire)
Run a piece of vinyl wire horizontally across a
window or other convenient location.
Leave the AM loop antenna connected.
FM outdoor antenna
(Using a television antenna)
≥
Disconnect the FM indoor antenna.
≥
The antenna should be installed by a competent
technician.
5–12 m
75
≠
coaxial cable
(not included)
The
r
a
dio
8291en-p20-25.fm Page 21 Tuesday, June 21, 2005 9:01 AM
