Panasonic SA-BT300PX, Руководство по обслуживанию

Страница: 24 / 140

24
7.1.1. Error Code Table 1
Error Code Diagnosis contents Description Monitor Display Automatic FL display
U30 Remote control code error Display appears when main unit and remote
controller codes are not matched. No display
* is remote controller code of the
main unit.
Display for 5 seconds.
U59 Abnormal inner temperature
detected Display appears when the drive temperature
exceeds 70 C.
The power is turned off forcibly.
For 30 minutes after this, all key entries are
disabled. (Fan motor operates at the highest
speed for the first 5 minutes. For the remain-
ing 25 minutes, fan motor is also stopped.)
The event is saved in memory as well. No display
U59 is displayed for 30 minutes.
U71 HDMI incompatible error
(HDCP incompatible) Display this error when the equipment (com-
patible with DVI such as TV, amplifier etc.)
connected to the unit by HDMI is incompatible
with HDCP.
*HDCP=High-bandwidth Digital Content Pro-
tection No display
U72 HDMI connection error
(communication error) This error is displayed when there are any
communication problems with the unit and the
equipments (TV, amplifier etc.) connected to
the unit by HDMI. (or when there is a problem
with the HDMI cable) No display
U72 display disappears when
error has been solved by Power
OFF/ON of connecting equipment
or by inserting/removing of HDMI
cable.
U73 HDMI connection error
(authentication error) when authentication error occurs while the
equipments (TV, amplifier etc.) are connected
by HDMI. (or when there is a problem with the
HDMI cable) No display
U73 display disappears when
error has been solved by Power
OFF/ON of connecting equipment
or by inserting/removing of HDMI
cable.
F99 Hang-up Displayed when communication error has
occurred between Main microprocessor
and Timer microprocessor (IC7501).
No display
Displayed is left until the [POWER]
key is pressed.
H19 Inoperative fan motor When inoperative fan motor is detected after
powered on, the power is turned off
automatically.
The event is saved in memory. No display No display
F00 No error information Initial setting for error code in memory
(Error code Initialization is possible with error
code initialization and main unit initialization.) No display No display
F34 Initialization error when main
microprocessor is started up
for program recording When initialization error is detected after
starting up main microprocessor
power
turned automatically.
The event is saved in memory.
No display No display
F58 Drive hardware error When drive unit error is detected, the event is
saved in memory. No display No display
UNSUP-
PORT Unsupported disc error *An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty. This disc is
incompatible.
NO READ Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read. Cannot rea d.
Please check the
disc.
HARD
ERR Drive error The drive detected a hard error. DVD drive error. Display for 5 seconds.
the
is off
UNSUPPORT
HARD ERR
The character indication flows
sideways.
F99
U73
NOREAD
U71
U72
U59
SET *