60
Step 1 Desolder pins of the regulator diode (D5802) on the sol-
der side of SMPS P.C.B..
Step 2 Remove 1 screw from the regulator diode (D5802).
Step 3 Remove the regulator diode (D5802) from the SMPS
P.C.B..
Caution: Handle the SMPS P.C.B. with care due to its high
temperature after prolonged use. Touching it may lead to
injuries.
Note: Refer to the diagrams of SMPS P.C.B. (Item 17.8) for
location of the electrical components.
9.24.2.
Assembly of Regulator Diode
(D5802)
Step 1 Apply grease to the heatsink unit C.
Step 2 Mount the regulator diode (D5802) on to SMPS P.C.B..
Step 3 Fix and screw the regulator diode (D5802) to the heat-
sink unit C.
Caution: Ensure the regulator diode (D5802) is tightly
screwed to the heatsink unit C.
Step 4 Solder pins of the regulator diode (D5802) on the solder
side of SMPS P.C.B..
Caution: Ensure pins of the regulator diode (D5802) are
properly seated and soldered on SMPS P.C.B..
9.25. Replacement of Regulator
Diode (D5803)
9.25.1.
Disassembly of Regulator Diode
(D5803)
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 6) of Item 9.6.
• Follow (Step 1) to (Step 7) of Item 9.20.
Содержание SA-BT205GA
