41
9.13.2.
Assembly of Regulator IC (IC2010)
Step 1 Apply grease to the Small Heatsink.
Step 2 Mount the Regulator IC (IC2010) on Main P.C.B..
Caution: Ensure pins of the Regulator IC (IC2010) are prop-
erly seated on Main P.C.B..
Step 3 Screw the Regulator IC (IC2010) to the Small Heatsink.
Caution: Ensure the Regulator IC (IC2010) is tightly
screwed to the Small Heatsink.
Step 4 Solder pins of the Regulator IC (IC2010) on the solder
side of Main P.C.B..
9.14. Disassembly of D-Amp P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 2 screws.
Step 2 Cut the Tie Wrap.
Caution: During assembling, tie the 6P Cable wire with the
Tie Wrap to SMPS P.C.B. as diagram shown.
Step 3 Detach 6P Cable Wire at the connector (CN5801) on
SMPS P.C.B.
Step 4 Remove 1 screw.
Содержание SA-AKX30PH
