Panasonic SA-AK630E, Руководство по обслуживанию, Страница: 70 / 168

error code is “remembered” and shown on the FL display.
2. Reset Condition of Error Code
A. During cold start of micro-processor IC.
B. Restart of aging mode for the mechanism unit.
3. Mechanism Error Code
Mechansim Error Code Table
Error Code Description
M-00 No Error
M-01 OPEN Position - Horizontal Motion
Abnormality at play position
M-02 PLAY Position - Horizontal Motion
Abnormality at stock position
M-03 PLAY Position - Horizontal Motion
Abnormality during changing position
M-04 CHANGE Position - Horizontal Error of Stock
position
M-05 CHANGE Position - Ascending motion Error
M-06 CHANGE Position - Descending motion Error
M-07 STOCK Position - Ascending motion Error
M-08 STOCK Position - Descending motion Error
M-09 Abnormality during change position (bottom
switch)
M-0A Clamp Error
M-0B Access Failure - Access Time of more tha 30
secs (Total time of automatic Read TOC
Track access)
4. When the mechanism unit stops due to error during aging model,
error code is remembered and counts of the errors are displayed
on the FL display.
13. CD Test Mode Function
This CD test mode is provided to check CD unit without connecting to changer loading
mechanism. This mode shall operate CD PLAY with CD unit being connected only and CD
Automatic Alignment result is shown on FL display.
13.1. How to set CD test mode
70
PDF created with pdfFactory Pro trial version www.pdffactory.com