Panasonic SA-AK630E, Руководство по обслуживанию, Страница: 68 / 168

wait until the tray is open.
5. Press and remove the CD.
6. Press to close the tray.
7. Press “ /STOP” to indicate Error Code.
- If several problem exist, error code will change each time
when “ /STOP” is pressed. (e.g. F15 F26 F16 ....etc).
12.5. To clear all Error code
1. Press and hold button for 5 seconds.
2. FL indicator shows “CLEAR” for 1 second and change to “T”.
12.6. To exit from Self-Diagnostic function
1. Press button on main unit or remote control.
12.7. Power Amplifier Failure (F61)
1. When power amplifier fail, F61 will indicate automatically.
12.8. Description of Error Code
12.8.1. Abnormality detection for Deck Mechanism block
No. Abnormal Items Error
Display
Method of Detection
1 MODE SW abnormal H01 Normal operation during mecha transition, MODE
abnormal is memorized. The content of abnormality
can be confirmed in the abnormal detection mode
explained in the later section.
2 REC INH SW abnormal H02 The content of abnormality can be confirmed in
abnormal detection mode explained in the later
3 HALF SW abnormal H03 The content of abnormality can be confirmed in
abnormal detection mode explained in the later
4 Reel pulse abnormal F01 The content of abnormality can be confirmed in
abnormal detection mode explained in the later
12.8.2. Abnormality detection for CD/Changer block
68
PDF created with pdfFactory Pro trial version www.pdffactory.com