20
R
Q
T
X
1328
G
e
tti
n
g
S
tar
ted
P
layi
n
g
Di
scs
Ot
h
e
r Op
e
ra
ti
o
ns
Refer
e
n
c
e
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 k
g
per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
∫
Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥
Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
∫
To prevent speakers from falling
[XH55]
[XH50]
[For\Southeast[Asia\and[India]
Front speaker, Surround speaker, Center speaker
e.g.
[XH55]
Front speaker
Speaker installation option
Attaching to a wall
e.g.,
[XH55]
Surround speaker
DO NOT
DO
≥
In this position, the speaker will
likely fall if moved to the left or
right.
≥
Move the speaker so that the
screw is in this position.
At least 30 mm
‰
7.0 mm to
‰
9.4 mm
Wall or pillar
[XH50]
[For[the\Middle\East,\Australia]and]N.Z.]
3 mm to 5 mm
[For[others]
5.5 mm to 7.5 mm
‰
4.0 mm
Center speaker
A
17.6 mm
B
98.7 mm
C
40 mm
D
40 mm
E
16.7 mm
F
63.7 mm
G
23 mm
H
96 mm
I
26 mm
[XH55]
Surround speaker
[XH50]
[For\Southeast[Asia\and[India]
Front/Surround speaker
[XH55]
[XH50]
[For\Southeast[Asia\and[India]
[XH55]
Front speaker
Attach to a wall without the base and the stand
Reattaching the speaker cable
[XH55]
J
64.5 mm
K
348.5 mm
L
109.5 mm
M
50.3 mm
N
50.3 mm
O
12.3 mm
P
106.7 mm
Q
40 mm
R
40 mm
[XH50]
[For[the\Middle\East,\Australia]and]N.Z.]
Wall
Screw eye
(not supplied)
String (not supplied)
Less than
10 cm
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm.
SC-XH55-50 GSGAGWGN_RQTX1328-1B_eng.book Page 20 Wednesday, March 2, 2011 5:33 PM
