Panasonic S-36PU1E5A, Руководство по обслуживанию

Страница: 395 / 693

1
1-385
5-2. Suspending the Indoor Unit
Depending on the ceiling type:
•
Insert suspension bolts (Fig. 1-110)
or
• Use existing ceiling supports or construct a suitable support
(Fig. 1-111).
Fig. 1-113
Hole-in-anchor
Hole-in-plug
Concrete
Insert
Suspension bolt (M10 or 3/8")
(field supply)
Fig. 1-110
Ceiling tiles
Ceiling support
Fig. 1-111
(1) When placing the unit inside the ceiling, determine the pitch of the suspension bolts referring to the dimensional data as shown in
Fig. 1-108 and Table 1-11.
Tubing must be laid and connected inside the ceiling when suspending the unit.
If the ceiling is already constructed, lay the tubing into position for connection to the unit before placing the unit inside the ceiling.
(2) Screw in the suspension bolts allowing them to protrude from the ceiling (Fig. 1-110). (Cut the ceiling material, if necessary.)
(3) Thread the 3 hexagonal nuts and 2 washers (field supply) onto each of the 4 suspension bolts (Figs. 1-112 and 1-113).
Use 1 nut and 1 washer for the upper part, and 2 nuts and 1 washer for the lower part, so that the unit will not fall off the suspension
lugs.
Fig. 1-112
Suspension bolt
Nuts and washers
(use for upper and lower)
Double nuts
Suspension lug
Notch
Suspension bolt
Hexagonal nut
Double nuts
It is important that you use extreme care in supporting the indoor unit inside the ceiling.
Ensure that the ceiling is strong enough to support the weight of the unit.
Before suspending the unit, test the strength of each attached suspension bolt.
This shows an example of installation.
Fig. 1-114
Air outlet duct
Suspension bolt
Bolt anchor
Ceiling material
Indoor unit
Air-outlet grille
WARNING
SM830231-02̲Single̲欧州.indb 385 SM830231-02̲Single̲欧州.indb 385 2014/09/19 13:22:04 2014/09/19 13:22:04