VQT2Y39
35
Other
Symptom
Checkpoints
Playing
I set the playback speed, however, the
file is played with 100 % speed.
• When the PCM playback starts after the playback of the speed-adjusted MP3 file finishes, the
speed returns to 100 % speed (
➜
page 17).
The order of playing changed after
reloading files that were once imported
to the computer to this unit.
• This occurs because files imported from the computer are placed at
the end in the folder (
➜
page 27).
There is no sound from the earphones
or it is difficult to hear or noisy.
• Ensure the plug is inserted firmly.
• Wipe the plug clean.
The sound is distorted. There is a
noise at the beginning of sound.
• Please lower the microphone sensitivity (
➜
page 14) or keep more
distance from the recording sound source.
I hear noises from this unit.
• Move a mobile telephone away from this unit when you use the two in the same area.
Recorded sounds contain noise that
makes it difficult to hear sounds.
• Reduce noise (
➜
page 18). Noise is reduced and listening may
become easier.
Others
The power cannot be turned on.
• The batteries may have run out. Replace the batteries with the new ones (
➜
page 5).
The power automatically
turns off.
• When you do not operate for more than approx. 15 minutes, the power automatically turns off. When
you slide the OPERATION/HOLD switch to “
OPR
” side, the power is turned on (
➜
page 6).
Cannot delete a file or folder.
• The file is protected (
➜
page 13).
• The folder is already empty.
• “
” (blinking) is displayed (
➜
page12).
This unit is not recognized by
a computer.
• The OS on the computer may not be compliant with this unit (
➜
page 31).
• The password has been set (
➜
page 21).
• Are the batteries in this unit? If they are not, insert batteries (
➜
page 5).
• When the voltage of the batteries are too low, “
” is displayed
and the computer cannot recognize this unit (
➜
page 33).