3
≥
Switch the write-protect switch
a
to
“LOCK”. Unlock when you want to record
or edit the card again.
≥
While data is being read or written, do not
remove the card or turn off any equipment
using the card. Do not remove the
batteries from battery-operated
equipment. These actions can cause data to be destroyed.
≥
Make backup copies of your data wherever possible.
Panasonic will not accept responsibility for any data loss, or
loss directly or indirectly caused by data loss.
≥
SDHC(SD) compatible equipment may contain the functions
“Format” and “Erase”. However, in most cases all data on the
card will not be completely erased even after performing these
functions. When disposing or transferring ownership of the
card, we recommend using Panasonic formatting software
(http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html)
to completely erase all data from the card.
≥
When you dispose of the SDHC(SD) memory card, destroy it
physically or erase all data completely and follow your local
rules of separation and disposal of waste.
Interface:
Standard SDHC(SD) memory card
interface
Clock frequency:
up to 50 MHz
Operating voltage:
2.7 V to 3.6 V
Dimensions (W
t
H
t
D):
24.0 mm
a
32.0 mm
a
2.1 mm
(
a
a
)
Mass (Weight):
2
g
(0.07 oz)
Operating temperature:
j
25
o
C to
i
85
o
C (
j
13
o
F to
i
185
o
F)
≥
Specifications are subject to change without notice.
≥
Mass and dimensions are approximate.
≥
SDHC Logo is a trademark of SD-3C, LLC.
≥
SD Logo is a trademark of SD-3C, LLC.
Protecting your data
Cautions about disposal or transferring
ownership of this card
Specifications
LOCK
RP-SDL_E1.book 3 ページ ２０１１年８月２５日 木曜日 午後４時４６分
