Make sure the temperature of LED unit has cooled down before maintenance (cleaning)
or replacement of lamp.
10
Vacuum
cleaner
Drywall
Drywall
Disconnect power source before working on unit.
Routine maintenance must be done every year.
Please wear gloves during the cleaning work.
Never use gasoline, benzene, thinner or any other
such chemicals for cleaning the ventilating fan.
Do not immerse motor in water when cleaing.
Do not soak resin parts in water over 140°F (60°C).
Remove grille
1
Gloves
Slot
Grille
Mounting spring
1
Remove grille by pulling down one mounting spring
Disonnect the wire from the receptacle, then pull
down the other mountain spring.
2
3
Remove dust and dirt from fan body
using a vacuum cleaner.
Using a cloth dampened with kitchen detergent,
remove any dirt from fan body. Wipe dry with clean
cloth. Reinstall grille after finishing.
Maintenance of unit
1
Clean grille. (Don’t put into hot water. Use non-abrasive
kitchen detergent, wipe dry with clean cloth.)
NOTE: The grille should be dry after cleaning.
Gloves
2
3
MAINTENANCE (CLEANING)
1
