91
For Y
our
Inf
ormation
1
Insert a rigid wire, such as an
extended paper clip into point (A)
and lift cover up.
2
Using Tweezers or needle-nose
pliers, carefully remove bulb.
• Take unit to servicenter if you need
assistance.
This product has a fluorescent lamp that contains a small amount of mercury. It also
contains lead in some components. Disposal of these materials may be regulated in
your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance:
<http://www.eiae.org.>
Notice
Notes On Operations
Replacing the Bulb
Before you begin
• Set POWER to OFF.
DANGER:
Use only replacement bulb (PART NO. LSLL0028) supplied by Panasonic to reduce risk
of fire. Handle new bulb with cloth or tissue as skin oils decrease bulb life. Remove lens
cover and allow bulb to cool before replacing to avoid possible burn hazard.
4
Replace lens cover.
Note
3
Replace bulb using a clean cloth or
tissue. (Do not touch with fingers.)
(A)
• Handle bulb gently. Excessive force may
cause bulb to crack.
Concerning the Memory Card (Optional)
(MultiMediaCard and SD Memory Card)
• Model PV-DV102 can be used with either a MultiMediaCard or a SD Memory Card.
• Both of these exterior Memory Cards (MultiMediaCard and SD Memory Card) are
lightweight and removable.
• Both Memory Cards (MultiMediaCard and SD Memory Card) are offered in a variety of
memory sizes, so you can purchase a higher capacity Memory Card if desired.
DV102.P 89-92.p65
02/03/05, 13:00
91
