Panasonic PV-DAC10, Руководство по обслуживанию

Страница: 69 / 195

3-6
PREPARATION
1. Open the LCD panel.
LCD Panel
Fig. E3-1
2. Remove Screws (A), the Right Cover Unit and the Short JIG
C.B.A. from the unit.
Screws (A)
Short JIG C.B.A.
Right Cover Unit
Fig. E3-2
3. Connect the Camera Connecting Cable to P101 and P102
on the Interface Board.
Camera Connectiong
Cable
Interface Board
P101
P102
Fig. E3-3
4. Connect the Camera Connecting Cable to B3 on the unit.
Camera Connectiong
Cable
B3
Fig. E3-4
5. Connect the AC Adaptor to the unit.
6. Connect the P108 on the Interface Board to RS232C of the
PC with Inter Link Cable.
7. Set the SW115 (M103 EXMOD1) on the Interface Board to
“GND.”
8. Set the SW110(RS232C SEL) on the Interface Board to
“DSUB.”
9. Set the SW114 (M103 VPP) on the Interface Board to “3 V.”
10. Set the SW103 (RECI) on the Interface Board to “OFF.”
11. Set the SW108 (BST TEST) on the Interface Board to
“OFF.”
12. Set the SW109 (IRIS) on the Interface Board to center.
13. Set the SW111(5 V SEL) on the Interface Board to “CAM 5
V.”
14. Set the SW113 (POWER ON) on the Interface Board to
“NORM.”
15. Power on the DVC.