Panasonic PTL785U - LCD PROJECTOR UNIT, Руководство по эксплуатации

Страница: 28 / 88

28-E
NGLISH
Correcting the image position
automatically (AUTO SETUP)
The position of the projected image can be corrected automatically in
accordance with the input signal.
Projector control panel
Press the AUTO SETUP button.
(When the edges of the projected image are not visible)
B
Automatic positioning
will be carried out.
[
NOTE:
B
“AUTO SETUP” does not function when DVI signals are being input.
B
When RGB signals are being input, “DOT CLOCK”, and “CLOCK
PHASE” will be adjusted automatically in addition to the position of the
image being corrected (except when the dot clock frequency is 108 MHz
or higher). Refer to page 43 for details.
B
If the edges of the projected image are indistinct, or if a dark picture is
being projected, the automatic setup processing may stop automatically
before it is complete. If this happens, project a different picture and then
press the AUTO SETUP button again.
ALL SET
A
RGB VIDEO AUTO SETUP SHUTTER
INPUT