Panasonic PTL785U - LCD PROJECTOR UNIT, Руководство по эксплуатации

Страница: 25 / 88

E
NGLISH
-25
Basic
Operation
Press the input select button to select the
input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
Press the AUTO SETUP button to initiate
automatic positioning.
B
The position of the projected image
will be corrected automatically in
accordance with the input signal.
(Refer to page 28 for details.)
B
If the projected image contains
keystone distortion, adjust
“KEYSTONE” in the “POSITION” menu (refer to page 43 for details).
Input select
buttons
Changing
signals
VIDEO
VIDEO
RGB
RGB
VIDEO
S-VIDEO
RGB1
RGB3 DVI
RGB2
&
'
Adjusting the angle
B
While pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
B
A picture will be projected in accordance with the selected input
signal.
B
When an YP
B
P
R
signal is being input, “YP
B
P
R
” will be displayed
(when “RGB/YP
B
P
R
” in the “OPTION” menu is set to “YP
B
P
R
”.
Refer to page 47 for details).
Adjusting the focus
B
Press the FOCUS +/- buttons to adjust the focus of the projected image.
The focus of the projected image can also be adjusted by turning the
focus ring. To make fine adjustments, use the FOCUS +/- buttons.
Adjusting the size
B
Press the ZOOM +/- buttons to adjust the size of the projected image.
)
*
(
AUTO SETUP