![background image](http://html.mh-extra.com/html/panasonic/pt_at6000e/pt_at6000e_service-manual_270756035.webp)
2. 4. Removal of Optical Block / Analysis Block
1. Remove the A-P.C.Board block according to the steps 1 through 2 in the section 2.3. "Removal of A-P.C.Board".
2. Loosen the 2 screws and remove the Lamp unit.
3. Unscrew the 1 screw and remove the V-P.C.Board.
4. Unscrew the 3 screws and remove the Front cover.
5. Unscrew the 1 screw and remove the A-P.C.Board earth metal.
6. Unscrew the 2 screws and remove the Optical block.
7. Unscrew the 4 screws and remove the Analysis block.
V-P.C.Board
Front cover
A-P.C.Board
earth metal
Optical Block (with a lens unit)
Analysis block
* There is not enough space between
the Analysis block and Optical block.
Be careful not to damage nor dirty
precision components (LCD panel,
incidence polarizer, etc.) when
removing.
* The incidence polarizer is installed in
the Analysis block.
Be careful not to shift the installation
position nor damage it.
XTBT969FJK
XYN3+F6FJ
XYN3+F6FJ
XTV3+10GFJ
XYN3+F10FJ
DIS-5
Содержание PT_AT6000E
