Panasonic PT47X54J - 47" PROJECTION TV Скачать руководство пользователя страница 203

Страница: 203 / 328

Some tie wraps that secure the wire dressings may need to be unfastened for chassis removal.

3. Remove plug connector in A6 that goes to G-Board (G1).

4. Remove plug connectors in A7, A8 that goes to K-board (K1) and R

-board (R1).

D-Board

1. D-Board is secured to the chassis tray with five screws.

2. The D-Board is mated to A-Board by four connectors (female side

of connectors): D1, D2, D3 & D4. To remove this board, unplug the
connectors on the A-Board pulling from the sides of each
connector.

NOTE:
Some tie-wraps that secure the wire dressings may need to be unfastened for chassis removal.

DC-Board

1. Plugs onto the D-Board at the D21, D22 and D23 (DC1, DC2 and

DC3 respectively) connectors.

NOTE:
This board is non-serviceable. / When removing this board pull carefully.

R-Board

1. This board is secured to the upper front side of the light box by

one screw, and plugged to R1 connector from A7 on A-Board.

LR, LG and LB Board

1. Each board is plugged into the socket on the PRT neck, LR-Board

on red PRT, LG-Board on green PRT and LB-Board on blue PRT.

Содержание PT47X54J - 47" PROJECTION TV









































































































































































































































































































































Результаты поиска

Содержание PT47X54J - 47" PROJECTION TV

Отзывы:

Похожие инструкции для PT47X54J - 47" PROJECTION TV

Бренды по названию

Популярные бренды

Panasonic PT47X54J - 47" PROJECTION TV, Руководство по обслуживанию

Результаты поиска

Содержание PT47X54J - 47" PROJECTION TV

Отзывы:

Похожие инструкции для PT47X54J - 47" PROJECTION TV

Бренды по названию

Популярные бренды