r
Luminous lamp
The light source of the projector is a high-pressure mercury lamp.
A high-pressure mercury lamp has the following characteristics.
f
The luminance of the luminous lamp will decrease by duration of usage.
f
The luminous lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or
degradation due to cumulative runtime.
f
The luminous lamp life varies greatly depending on individual differences and usage conditions. In particular,
continuous use for 12 hours or more and frequent off/on switching of the power greatly deteriorate the luminous
lamp and affect the luminous lamp life.
f
In rare cases, the luminous lamp burst shortly after the projection.
f
The risk of bursting increases when the luminous lamp is used beyond its replacement cycle. Make sure to
replace the lamp unit according to the proper replacement time . (“When to replace the lamp unit” (
Æ
page
154) and “How to replace the lamp unit” (
Æ
page 154))
f
If the luminous lamp bursts, gas contained inside of the luminous lamp is released in a form of smoke.
f
It is recommended to store replacement lamps for contingency.
r
Computer and external device connections
When connecting a computer or an external device, read this manual carefully regarding the use of power cords
and shielded cables as well.
24 -
ENGLISH
Chapter 1 Preparation - Precautions for use
Содержание PT-VX615N
Страница 44: ...Chapter 3 Basic Operations This chapter describes basic operations to start with 44 ENGLISH...
Страница 110: ...Chapter 5 Operation of Function This chapter describes the operation methods of some functions 110 ENGLISH...
Страница 161: ...Chapter 7 Appendix This chapter describes specifications for the projector ENGLISH 161...