[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from th
e sub-menu
.
Refer to "Navigating through the menu"
(
x
page 47)
for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[WIRED LAN]
You can make detailed wired LAN settings.
1) Press
as
to select [WIRED LAN].
2) Press the <ENTER> button.
f
The [WIRED DETAILED SETUP] screen is displayed.
3) Press
as
to select an item, and change the setting according to the instructions.
[DHCP]
[ON]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[OFF]:
If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP ADDRESS], [SUBNET MASK] and
[DEFAULT GATEWAY].
[IP ADDRESS]
Enter the IP address if DHCP server is not used.
[SUBNET MASK]
Enter the subnet mask if DHCP server is not used.
[DEFAULT GATEWAY]
Enter the gateway address if DHCP server is not used.
[DNS1]
Enter the DNS server address if DHCP server is not used.
[DNS2]
Enter the alternate DNS server address if DHCP server is not used.
4) Press
as
to select [OK], and press
the
<ENTER> button.
r
Default wired LAN settings
f
The following settings are set before the projector leaves the factory.
[DHCP]
OFF
[IP ADDRESS]
192.168.10.100
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.10.1
[DNS1] / [DNS2]
NONE
Note
f
When using a DHCP server, confirm that the DHCP server is running.
f
Consult your network administrator regarding the IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY.
ENGLISH
- 79
Chapter 4 Settings - [NETWORK] menu
