[CC2]
Displays CC2 data.
[CC3]
Displays CC3 data.
[CC4]
Displays CC4 data.
Note
f
Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not
be displayed depending on the connected devices or contents being played back.
f
[CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YC
B
C
R
signal is input.
f
If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices
or the used content of the closed caption corresponding connection.
f
If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXT
DISPLAY] (
x
page 77) is set to [ON].
f
Closed captions are not displayed when the menu screen is displayed.
[SCREEN SETTING]
(Only for PT-VW350)
Set the screen size.
When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary
for the screen in use.
1) Press
as
to select [SCREEN SETTING].
2) Press the <ENTER> button.
f
The [SCREEN SETTING] screen is displayed.
3) Press
as
to select [SCREEN FORMAT].
4) Press
qw
to switch the [SCREEN FORMAT] item.
f
The items will switch each time you press the button.
[SCREEN FORMAT]
Description
Range when [SCREEN POSITION] is selected
[16:10]
The projected aspect ratio is 16:10.
Cannot be adjusted.
[16:9]
The projected aspect ratio is 16:9.
Adjusts the vertical position.
5) Press
as
to select [SCREEN POSITION].
f
If [SCREEN FORMAT] is set to [16:10], adjustment of [SCREEN POSITION] is not available.
6) Press
qw
to adjust the [SCREEN POSITION].
f
The items will switch each time you press the button.
[HIGH]
The image which aspect ratio is 16:9 will displayed at the top.
[CENTER]
The image which aspect ratio is 16:9 will displayed in the center.
[LOW]
The image which aspect ratio is 16:9 will displayed at the bottom.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press
as
to select [STARTUP LOGO].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT LOGO]
Displays the Panasonic logo.
[USER LOGO]
Displays the image registered by the user.
[OFF]
Disables the startup logo display.
Note
f
The startup logo will disappear in approximately
30 seconds.
f
To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
f
If you do not register the image of the [USER LOGO], the startup logo will not be displayed even if the [STARTUP LOGO] is
set to [USER LOGO].
64 -
ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
