Chapter 4
Settings — [3D SETTINGS] menu
102 - ENGLISH
[3D SETTINGS] menu
On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 76) for the operation of the menu screen.
[3D SYSTEM SETTING]
Set the image display method to be used during 3D signal input, according to the 3D system in use.
1) Press
as
to select [3D SYSTEM SETTING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[SINGLE]
During 3D signal input, images for the left eye and right eye are alternately displayed using the frame
sequential format.
[DUAL (LEFT)]
Only images for the left eye are displayed during 3D signal input.
[DUAL (RIGHT)]
Only images for the right eye are displayed during 3D signal input.
Note
f
When 2D images are input, 2D images are displayed regardless of the [3D SYSTEM SETTING] settings.
[3D SYNC SETTING]
Set the way in which the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal will be used.
Attention
f
Before connecting external devices to the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal using cables, complete the
[3D SYNC MODE] setting and confirm that the external devices to be connected are turned off.
f
Changing the [3D SYNC MODE] setting while the cables are connected may result in malfunctions of the projector or the connected external
devices.
1) Press
as
to select [3D SYNC SETTING].
2) Press the <ENTER> button.
f
The precaution message related to [3D SYNC SETTING] is displayed.
3) Press the <ENTER> button.
f
The
[3D SYNC SETTING]
screen is displayed.
4) Press
as
to select [3D SYNC MODE].
5) Press
qw
to switch the item.
[3D SYNC MODE]
Details to be set in [3D SYNC1]
Details to be set in [3D SYNC2]
[OFF]
Not used.
Not used.
[1]
3D trigger output
Stereo synch output
[2]
3D trigger output
3D trigger output
[3]
Stereo synch input
Through 3D SYNC1
[4]
Stereo synch input
Stereo synch output
[5]
Stereo synch input
3D trigger output
[6]
Frame synch input
Through 3D SYNC1
[7]
Frame synch input
Stereo synch output
[8]
Frame synch input
3D trigger output
[9]
3D trigger output
Frame synch output
[10]
Stereo synch output
Frame synch output
[11]
3D IR TRANSMITTER (+) output
3D IR TRANSMITTER (
-) output
6)
When [1], [4], [7], or [10] is selected, press
as
to select [STEREO SYNC OUTPUT DELAY], and press
qw
to set the amount of delay for output.
[0us] - [25000us]
Sets the amount in 10 us increments.
f
To synchronize multiple projectors to display 3D images, use a frame synch input and output.
Select [9] or [10] for the first projector.
