Panasonic PT-REQ10 Скачать руководство пользователя страница 262

Страница: 262 / 314

Chapter 5

Operations — Updating the firmware

262 - ENGLISH

Updating the firmware

1) Extract the compressed file downloaded from the website.

The firmware update tool (executable file in exe format) is generated.

File name (example): FirmUpdateTool_REQ12_101.exe

(Update tool for PT-REQ12/PT-REQ10/PT-REQ80 with version 1.01)

2) Double-click the executable file generated by extracting.

The update tool is started up, and the confirmation screen is displayed.

3) Confirm the status of the projector.

Confirm that the projector to be updated is in the standby mode.

4) Confirm the connection status.

Confirm that the projector to be updated and the computer to be used for update are correctly connected to

LAN.

5) Click [Next].

The license agreement screen is displayed.

Confirm the content of the license agreement.

The update tool will end by clicking [Close].

Содержание PT-REQ10



























































































































































































































































































































Результаты поиска

Содержание PT-REQ10

Отзывы:

Panasonic PT-REQ10, Руководство по эксплуатации, Страница: 262 / 314

Результаты поиска

Содержание PT-REQ10

Отзывы: