Panasonic PT-REQ10, Руководство по эксплуатации, Страница: 22 / 314

22 - ENGLISH
Features of the Projector
High image quality and fast
response
▶ With a new-generation laser light source
and a unique optical system enhancing
the color reproduction, high luminance of
12 000 lm
*1
and high contrast of 25 000:1
*2
are achieved. This projector also provides
high realistic sensation 4K images by
the QUAD PIXEL DRIVE technology.
Moreover, with the 4x speed 240 Hz drive
*3
that enables fast response, smooth and
highly expressive projection is achieved
even for fast-moving images.
*1 When [OPERATING MODE] is set to [NORMAL]
A value for PT-REQ12.
A value for PT-REQ10 is 10 000 lm and for PT-REQ80 is
8 000 lm.
*2 When [DYNAMIC CONTRAST] is set to [3]
*3 Supports signals up to 1920x1080/240. Supports 4K signals
up to 60 Hz.
High extensibility and flexible setup
▶ Flexibly supports various systems for the
customers by adopting the next-generation
slot specification Intel
®
Smart Display
Module and the Art-Net function. With the
lens memory function and utilizing the
characteristics of solid-state light source,
application to wide range of usage is
possible with support of all 360° direction
projection.
Long life and high reliability
▶ In addition to adopting the solid-state light
source with long life, the projector has
enhanced the dust resistance property of
the optical unit. By eliminating the filter, the
maintenance cost for long-term operation
is reduced. Also, it will contribute to the
stable operation by adopting the backup
function (HDMI input) that will continue the
projection even when the input signal is
discontinued.
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(
x
page 42)
2. Attach the projection lens.
(
x
page 51)
3. Connect with external devices.
(
x
page 59)
4. Connect the power cord.
(
x
page 68)
5. Switch on the projector.
(
x
page 70)
6. Make initial settings.
(
x
page 71)
f
Take this step when you switch on the
power for the first time after purchasing the
projector.
7. Select the input signal.
(
x
page 81)
8. Adjust the image.
(
x
page 83)