Panasonic PT-MW630, Руководство по эксплуатации

Страница: 104 / 229

Chapter 4 Settings — [DISPLAY OPTION] menu
104 - ENGLISH
3) Press
as
to select [EDID MODE] of [HDMI1] or [HDMI2].
4) Press the <ENTER> button.
f
The [HDMI1] screen or the [HDMI2] screen is displayed.
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT] Changes the EDID data according to the [SCREEN FORMAT] setting.
[USER] Set the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.
f
Proceed to Step 10) when [DEFAULT] or [SCREEN FIT] is selected.
6) Press the <ENTER> button.
f
The [RESOLUTION] screen is displayed.
7) Press
asqw
to select [RESOLUTION].
f
Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p],
[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8) Press the <ENTER> button.
f
The
[VERTICAL SCAN FREQUENCY]
screen is displayed.
9) Press
qw
to select [VERTICAL SCAN FREQUENCY].
f
Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f
Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f
Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g
[1920x1080p], [1920x1080i]
10) Press the <ENTER> button.
f
The confirmation screen is displayed.
11) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
Settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in the [HDMI IN] screen.
f
Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
f
The computer, video device, or projector in use may require the power to be turned off and on again after setting.
f
The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
[DIGITAL LINK IN]
Set this item in accordance with the video signal input to the <DIGITAL LINK/LAN> terminal.
Setting [SIGNAL LEVEL] in [DIGITAL LINK IN]
1) Press
as
to select [DIGITAL LINK IN].
2) Press the <ENTER> button.
f
The
[DIGITAL LINK IN]
screen is displayed.
3) Press
as
to select [SIGNAL LEVEL].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[64-940]
Select this item when the signal output from the HDMI terminal of an external device (Blu-ray disc
player, etc.) is input to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
[0-1023]
Select this item when the signal output from the DVI-D terminal or HDMI terminal of an external
device (such as a computer) is input to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable
transmitter.