Panasonic PT-LW271U Скачать руководство пользователя

Страница: 55 / 72

Maintenance/replacement

ENGLISH -

Maintenance

Replacing the unit

Air filters

The air filter should be replaced when cleaning is ineffective.

A replacement air filter unit is available separately. (service component)

Contact your dealer for the optional air filters.

Also, please replace the air filters together when replacing the lamp unit.

The air filters (Part Number: Longer filter with 5 rows of intake vents H518PC13G041, Shorter filter with

3 rows of intake vents H518PC12G041) are included with the [ET-LAL331 / ET-LAL341] replacement lamp unit.

Replacement of the air filters

Turn off the projector, and remove the AC power plug from the AC outlet.

)

Clean up the dust on the projector and around the air vents.

)

Pull out the air filters straight and slowly with grabbing the knobs.

)

Air filter (shorter filter with

3 rows of intake vents)

Air filter (longer filter with

5 rows of intake vents)

Protrusion

Knob

Install the new air filters (Replacement air filters).

)

Hold the air filters with the protrusion up towards the top panel as shown in the picture and insert them until

you hear a "click" sound.

Reset the [Filter Reminder].

)

Turn on the power and perform [Cleaning up Reminder] in the [Options] menu.

(

page 44)

Attention

Turn off the power before you replace the air filters.

When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is safe, even in the

event of the air filter unit dropping.

Do not operate the projector with the air filter unit removed. Dust may accumulate on the optical elements degrading picture

quality.

Do not put anything into the air vents. Doing so may result in malfunction of the projector.

Lamp unit

The lamp unit is a consumable component. See "When to replace the lamp unit" about the lifespan.

It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer.

Consult your dealer to purchase a replacement lamp unit.

(for PT-TW330EA / PT-TX300EA: ET-LAL341; for PT-TW240EA: ET-LAL331)

CAUTION:

■ Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.)

The inside of the cover can become very hot, take care to avoid burn injuries.

Содержание PT-LW271U









































































Результаты поиска

Содержание PT-LW271U

Отзывы:

Похожие инструкции для PT-LW271U

Бренды по названию

Популярные бренды

Panasonic PT-LW271U, Руководство по эксплуатации

Результаты поиска

Содержание PT-LW271U

Отзывы:

Похожие инструкции для PT-LW271U

Бренды по названию

Популярные бренды