8-E
NGLISH
Always disconnect all cables before moving the projector.
B
Moving the projector with cables still attached can damage the cables,
which could cause fire or electric shocks to occur.
Do not place any heavy objects on top of the projector.
B
Failure to observe this may cause the projector to become unbalanced
and fall, which could result in damage or injury.
Do not short-circuit, heat or disassemble the batteries or place them
into water or fire.
B
Failure to observe this may cause the batteries to overheat, leak, explode
or catch fire, and burns or other injury may result.
When inserting the batteries, make sure the polarities (+ and -) are
correct.
B
If the batteries are inserted incorrectly, they may explode or leak, and fire, injury
or contamination of the battery compartment and surrounding area may result.
Use only the specified batteries.
B
If incorrect batteries are used, they may explode or leak, and fire, injury or
contamination of the battery compartment and surrounding area may result.
Do not mix old and new batteries.
B
If the batteries are inserted incorrectly, they may explode or leak, and fire,
injury or contamination of the battery compartment and surrounding area
may result.
Do not put your weight on this projector.
B
You could fall or the projector could break, and injury may result.
B
Be especially careful not to let young children stand or sit on the projector.
If not using the projector for an extended period of time, disconnect the
mains plug from the mains socket.
B
If dust builds up on the mains plug, the resulting humidity may damage
the insulation, which could result in fire.
B
This projector continues to draw approximately 3 W of power even when
the power is turned off.
Disconnect the mains plug from the mains socket as a safety
precaution before carrying out any cleaning.
B
Electric shocks can result if this is not done.
If the lamp has broken, ventilate the room immediately. Do not touch or
bring your face close to the broken pieces.
B
Failure to observe this may cause the user to absorb the gas which was
released when the lamp broke and which contains nearly the same
amount of mercury as fluorescent lamps, and the broken pieces may
cause injury.
B
If you believe that you have absorbed the gas or that the gas has got into
your eyes or mouth, seek medical advice immediately.
B
Ask your dealer to replace the lamp unit and check the inside of the
projector.
Содержание PT-LB55NT
Страница 1: ...ENGLISH R LCD Projector Operating Instructions Model No PT LB60NTE PT LB55NTE Commercial Use ...
Страница 2: ......
Страница 25: ...ENGLISH 25 Getting started ...