Panasonic PT-LB51NT, Технические характеристики

Страница: 9 / 10

S
P E C
F
I L E
PT- LB51NT
Micro-Portable Wireless LCD Projector
As of May 2007 < 9 >
Parameter format
Parameter format S ize (Byte) Difinition
<pl>
<off on>
<input s ignal>
<in s tallation>
<language>
<power condition>
<lamp condition>
<acctch>
<lamp power>
<color temp>
3 (1 or 2 byte s al s o
po ss ible when
under control)
1
3
1
3
3
1
4
1
1
Dicimal without s ign s : 0-999 (000, 001, 002...999)
Dicimal with s ign s : -99 to +99 (-99...-01, +00, +01, +02...+99)
Callbac k from the projector i s 3 Byte.
0 = off, 1 = on
R G 1 = computer 1, R G 2 = computer 2, NWP = networ k ,
VID = video, S VD = S -Video
0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear
EN G = Engli s h, DEU = G erman, FRA = French, E S P = S pani s h,
ITL = Italian, JPN = Japane s e, CHI = Chine s e, POR = Portugue s e,
S VE = S wedi s h, NOR = Norwegian, DAN = Dani s h, POL = Poli s h,
CE S = Czech, MA G = Hungarian, RU S = Ru ss ian, THA = Thai, K OR = K orean
000 = power on ( s tandby mode on), 001 = power off ( s tandby mode off)
0 = s tandby, 1 = lamp on under control, 2 = lamp off,
3 = lamp off under control
Dicimal without s ign s : 0000-9999 hour s
0 = economy, 1 = normal
0 = low, 1 = s tandard, 2 = high
Command example
To set the volume to +30, send the command as shown below.
STX AVL : 30 ETX
Start Command Parameter End
NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.
NOTE: When sending commands without parameters, a colon (:) is not necessary.