Panasonic PT-LB51E, Руководство по эксплуатации

Страница: 36 / 56

E
NGLISH - 36
Settings
OPTION menu
When the input signal is changed, the input signal
information will be displayed in the upper right corner of
the projected images. You can select the level of the
input signal information.
You can switch the logo on/off that is displayed when
starting up the projector. Press
I H
to select the
required option.
ON
Active
OFF
Deactive
You can assign frequently-used operations to the
FUNCTION
button on the projector and use it as a
convenient shortcut button. The functions which can be
set are “
SHUTTER
”, “
AUTO SETUP
”, “
PICTURE
MODE
”, “
FREEZE
” and “
INDEX WINDOW
”.
Use
I H
to select the function to assign to the
FUNCTION
button.
You can switch the function of the
COMPUTER2 IN/
1 OUT
terminal.
INPUT COMPUTER2 IN
OUTPUT COMPUTER1 OUT
This setting changes the lamp brightness. When set to
“
ECO-MODE
”, the luminance of the lamp is reduced, but
the projector uses less power, and the operating noise is
also reduced. This can help to extend the lamp’s
operating life. If using the projector in small rooms where
high luminance is not required, it is recommended that
you set the “
LAMP POWER
” to “
ECO-MODE
”.
STANDARD
Normal mode
ECO-MODE
ECO mode
INPUT GUIDE
Options Function
OFF
The input signal information will not
be displayed.
SIMPLE
Only the name of the input signal will
be displayed.
DETAILED
The input signal information will be
displayed in detail.
NOTE:
• If “
INPUT GUIDE
” is set to “
DETAILED
”, the guide
screen for computer connection will be displayed when
COMPUTER1
or
COMPUTER2
is selected and no
signal is being input to the
COMPUTER1 IN
or
COMPUTER2 IN
connector. If you would like the guide
screen not to be displayed, set “
INPUT GUIDE
” to
“
SIMPLE
” or “
OFF
”.
STARTUP LOGO
Remote control Control panel
See “Navigating through the MENU” on page 29.
See “Main menu and Sub-menu” on page 30.
FUNCTION BUTTON
SHUTTER
Operates the shutter function
See “SHUTTER” on page 38
AUTO SETUP
Starts the automatic position
correction function
See “AUTO SETUP” on
page 37
PICTURE MODE
Switches the picture mode
See “PICTURE MODE” on
page 32
FREEZE
Operates the freeze function
See “Capturing an image” on
page 26
INDEX WINDOW
Operates the INDEX-
WINDOW function
See “INDEX-WINDOW” on
page 38
COMPUTER2 SELECT
LAMP POWER
NOTE:
• “
LAMP POWER
” cannot be set when no signal is being
input.
SHUTTER
INDEX WINDOW PICTURE MODE
FREEZE
AUTO SETUP